You hear a starter motor noise on your hyundai i40 once you start your car. We agree that this is not pleasant and that you have questions. Finding out such a sound is not always a good sign, but it may also be nothing serious. To assist you solve this problem, our team has decided to write this article to support you in this research. First, we will detail how the starter motor functions on your hyundai i40, and then what starter motor noises you can encounter on your hyundai i40.
Functioning and various information
Function of a starter motor on hyundai i40
The starter motor is an electric motor whose single function is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your hyundai i40 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on hyundai i40
- Do not try to start your engine for too long
- Do not use a starter motor on hyundai i40 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be sufficient to provide the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the origin of your failure to start repeatedly, your starter may be the future part you will have to swap.
I hear noises from the starter motor of my hyundai i40, what are the origins?
I experience a loud noise from the starter of my hyundai i40
If you experience a starter motor noise on hyundai i40 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the component resposible of the starter motor noise on your hyundai i40 replace it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, read this article about front end noise on hyundai i40 which may provide you other leads to eliminate your noise problem.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my hyundai i40
If you hear a clicking noise at the starter motor of your hyundai i40, there are two possible failures associated with this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable examine your electrical installation. If after looking at this clicking noise on hyundai i40 doesn’t come from your starter motor, check this article for more informations.
