You notice a starter motor noise on your Hyundai Bayon every time you start your car. We agree that this is not pleasant and that you have questions. Finding out such a sound is not always a good signal, but it may also be nothing major. To help you fix this problem, our team has decided to compose this content page to help you in this research. First, we will describe how the starter motor functions on your Hyundai Bayon, and then what starter motor noises you can discover on your Hyundai Bayon.
Functioning and various information
Function of a starter motor on Hyundai Bayon
The starter motor is an electric motor whose only role is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Hyundai Bayon is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Hyundai Bayon
- Do not run your starter too long
- Do not use a starter motor on Hyundai Bayon with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be good enough to provide the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future part you will have to change.
I notice noises from the starter motor of my Hyundai Bayon, what are the origins?
I experience a loud noise from the starter of my Hyundai Bayon
If you notice a starter motor noise on Hyundai Bayon and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is the element responsible of the starter motor noise on your Hyundai Bayon swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this content page about front end noise on Hyundai Bayon which may give you other leads to resolve your noise problem.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Hyundai Bayon
If you notice a clicking noise at the starter motor of your Hyundai Bayon, there are two possible failures connected to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable check your electrical installation. If after checking this clicking noise on Hyundai Bayon doesn’t come from your starter motor, check this article for more informations.
