You hear a starter motor noise on your GMC Canyon every time you start your car. We can understand that this is not pleasant and that you have inquiries. Listening such a noise is not always a good sign, but it may also be nothing significant. To support you resolve this problem, our team has chosen to compose this article content to assist you in this research. First, we will explain how the starter motor functions on your GMC Canyon, and then what starter motor noises you can encounter on your GMC Canyon.
Functioning and various information
Function of a starter motor on GMC Canyon
The starter motor is an electric motor whose only function is to start the engine unit of your automobile. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your GMC Canyon is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on GMC Canyon
- Do not run your starter too long
- Do not use a starter motor on GMC Canyon with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your automobile, the energy it is capable of holding may not be good enough to provide the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future part you will have to replace.
I hear noises from the starter motor of my GMC Canyon, what are the reasons?
I feel a loud noise from the starter of my GMC Canyon
If you listen a starter motor noise on GMC Canyon and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Verify the condition of the drive pinion, if it is the part responsible of the starter motor noise on your GMC Canyon replace it.
If it is a noise in the front of your automobile but it seems to you after checking not to come from your starter, consult this article content about front end noise on GMC Canyon which may give you other leads to solve your noise problem.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my GMC Canyon
If you hear a clicking noise at the starter motor of your GMC Canyon, there are two possible failures relating to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable examine your electrical installation. If after checking this clicking noise on GMC Canyon doesn’t come from your starter motor, check this article for more informations.