You listen a starter motor noise on your Ford Transit once you start your vehicle. We agree that this is not enjoyable and that you have inquiries. Listening such a noise is not always a good sign, but it may also be nothing serious. To support you solve this issue, our team has decided to produce this content to support you in this research. First, we will explain how the starter motor works on your Ford Transit, and then what starter motor noises you can encounter on your Ford Transit.
Functioning and various information
Function of a starter motor on Ford Transit
The starter motor is an electric motor whose single function is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Transit is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford Transit
- Do not run your starter too long
- Do not use a starter motor on Ford Transit with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be good enough to provide the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the reason of your failure to start repeatedly, your starter may be the future element you will have to replace.
I listen noises from the starter motor of my Ford Transit, what are the triggers?
I experience a loud noise from the starter of my Ford Transit
If you experience a starter motor noise on Ford Transit and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is the component resposible of the starter motor noise on your Ford Transit swap it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, browse this content about front end noise on Ford Transit which may give you other leads to resolve your noise issue.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Transit
If you listen a clicking noise at the starter motor of your Ford Transit, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a issue with unplugged cable examine your electrical installation. If after examining this clicking noise on Ford Transit doesn’t come from your starter motor, check this article for more informations.
