You listen a starter motor noise on your Ford S-max 2 every time you start your automobile. We can understand that this is not pleasant and that you have questions. Hearing such a sound is not always a good signal, but it may also be nothing major. To help you solve this trouble, our team has decided to prepare this article content to support you in this research. First, we will explain how the starter motor works on your Ford S-max 2, and then what starter motor noises you can encounter on your Ford S-max 2.
Functioning and various information
Function of a starter motor on Ford S-max 2
The starter motor is an electric motor whose sole job is to start the engine of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford S-max 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Ford S-max 2
- Do not run your starter too long
- Do not use a starter motor on Ford S-max 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your automobile, the energy it is capable of holding may not be good enough to give the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not fix the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I listen noises from the starter motor of my Ford S-max 2, what are the triggers?
I experience a loud noise from the starter of my Ford S-max 2
If you listen to a starter motor noise on Ford S-max 2 and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which case the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Ford S-max 2 replace it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, browse this article content about front end noise on Ford S-max 2 which may provide you other leads to remedy your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford S-max 2
If you listen a clicking noise at the starter motor of your Ford S-max 2, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable verify your electrical installation. If after examining this clicking noise on Ford S-max 2 doesn’t come from your starter motor, check this article for more informations.
