You listen a starter motor noise on your Ford Kuga when you start your automobile. We can understand that this is not enjoyable and that you have questions. Listening such a sound is not always a good signal, but it may also be nothing serious. To assist you fix this trouble, our team has chosen to prepare this article to support you in this research. First, we will explain how the starter motor works on your Ford Kuga, and then what starter motor noises you can notice on your Ford Kuga.
Functioning and various information
Function of a starter motor on Ford Kuga
The starter motor is an electric motor whose single task is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford Kuga is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Ford Kuga
- Do not try to start your engine for too long
- Do not use a starter motor on Ford Kuga with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is tired, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to furnish the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future component you will have to replace.
I listen noises from the starter motor of my Ford Kuga, what are the triggers?
I encounter a loud noise from the starter of my Ford Kuga
If you acknowledge a starter motor noise on Ford Kuga and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the part responsible of the starter motor noise on your Ford Kuga replace it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, browse this article about front end noise on Ford Kuga which may give you other leads to solve your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford Kuga
If you listen a clicking noise at the starter motor of your Ford Kuga, there are two possible failures associated with this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a trouble with unplugged cable check your electrical installation. If after tracking this clicking noise on Ford Kuga doesn’t come from your starter motor, check this article for more informations.
