You listen a starter motor noise on your Ford C-max 2 every time you start your vehicle. We agree that this is not agreeable and that you have questions. Listening such a noise is not always a good sign, but it may also be nothing major. To support you resolve this trouble, our team has decided to produce this content to help you in this research. First, we will explain how the starter motor works on your Ford C-max 2, and then what starter motor noises you can encounter on your Ford C-max 2.
Functioning and various information
Function of a starter motor on Ford C-max 2
The starter motor is an electric motor whose sole job is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford C-max 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Ford C-max 2
- Do not run your starter too long
- Do not use a starter motor on Ford C-max 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be good enough to furnish the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not treat the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I listen noises from the starter motor of my Ford C-max 2, what are the origins?
I experience a loud noise from the starter of my Ford C-max 2
If you experience a starter motor noise on Ford C-max 2 and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the state of the drive pinion, if it is responsible of the starter motor noise on your Ford C-max 2 change it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, check this content about front end noise on Ford C-max 2 which may provide you other leads to resolve your noise trouble.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford C-max 2
If you listen a clicking noise at the starter motor of your Ford C-max 2, there are two possible failures connected to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a trouble with unplugged cable examine your electrical installation. If after checking out this clicking noise on Ford C-max 2 doesn’t come from your starter motor, check this article for more informations.
