You listen a starter motor noise on your Ford B-max every time you start your vehicle. We agree that this is not enjoyable and that you have inquiries. Finding out such a sound is not always a good sign, but it may also be nothing serious. To support you solve this trouble, our team has decided to write this article to assist you in this research. First, we will detail how the starter motor works on your Ford B-max, and then what starter motor noises you can discover on your Ford B-max.starter-motor-noise-ford-b-max

Functioning and various information

Function of a starter motor on Ford B-max

The starter motor is an electric motor whose single function is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Ford B-max is activated and turns the drive pinion on the flywheel to start the engine.

How to prevent starter motor noises on Ford B-max

  • Do not run your starter too long
  • Even if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it. Indeed, the current required to make it turn and the speed of rotation only allows it to perform its function over very short and intense periods of time. If the vehicle does not start, look for the solution somewhere else.

  • Do not use a starter motor on Ford B-max with a tired battery
  • Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be enough to furnish the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future element you will have to replace.

I listen noises from the starter motor of my Ford B-max, what are the reasons?

I encounter a loud noise from the starter of my Ford B-max

If you perceive a starter motor noise on Ford B-max and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which case the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is responsible of the starter motor noise on your Ford B-max swap it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, read this article about front end noise on Ford B-max which may provide you other leads to fix your noise trouble.

I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Ford B-max

If you listen a clicking noise at the starter motor of your Ford B-max, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a trouble with unplugged cable examine your electrical installation. If after checking this clicking noise on Ford B-max doesn’t come from your starter motor, check this article for more informations.