You acknowledge a starter motor noise on your Fiat Panda 2 when you start your vehicle. We can understand that this is not enjoyable and that you have questions. Listening such a noise is not always a good indication, but it may also be nothing major. To assist you resolve this trouble, our team has chosen to write this article to help you in this research. First, we will describe how the starter motor works on your Fiat Panda 2, and then what starter motor noises you can encounter on your Fiat Panda 2.
Functioning and various information
Function of a starter motor on Fiat Panda 2
The starter motor is an electric motor whose single function is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Fiat Panda 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Fiat Panda 2
- Do not try to start your engine for too long
- Do not use a starter motor on Fiat Panda 2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be good enough to furnish the power expected by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not solve the reason of your failure to start repeatedly, your starter may be the future element you will have to change.
I acknowledge noises from the starter motor of my Fiat Panda 2, what are the causes?
I feel a loud noise from the starter of my Fiat Panda 2
If you experience a starter motor noise on Fiat Panda 2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be optimal, in which situation the gears will be worn down after some time and will not slip and will no longer properly activate the engine when starting. Check the state of the drive pinion, if it is the component resposible of the starter motor noise on your Fiat Panda 2 swap it.
If it is a noise in the front of your car but it seems to you after examining not to come from your starter, check this article about front end noise on Fiat Panda 2 which may offer you other leads to resolve your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Fiat Panda 2
If you acknowledge a clicking noise at the starter motor of your Fiat Panda 2, there are two possible failures associated with this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a trouble with unplugged cable check your electrical installation. If after tracking this clicking noise on Fiat Panda 2 doesn’t come from your starter motor, check this article for more informations.
