You listen a starter motor noise on your Dodge Ram each time you start your car. We agree that this is not pleasant and that you have inquiries. Hearing such a sound is not always a good indication, but it may also be nothing severe. To assist you fix this problem, our team has chosen to produce this article content to support you in this research. First, we will describe how the starter motor works on your Dodge Ram, and then what starter motor noises you can notice on your Dodge Ram.
Functioning and various information
Function of a starter motor on Dodge Ram
The starter motor is an electric motor whose only task is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Ram is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Dodge Ram
- Do not try to start your engine for too long
- Do not use a starter motor on Dodge Ram with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be good enough to give the power demanded by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future component you will have to change.
I listen noises from the starter motor of my Dodge Ram, what are the triggers?
I experience a loud noise from the starter of my Dodge Ram
If you listen a starter motor noise on Dodge Ram and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the element responsible of the starter motor noise on your Dodge Ram change it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, browse this article content about front end noise on Dodge Ram which may give you other leads to remedy your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Ram
If you listen a clicking noise at the starter motor of your Dodge Ram, there are two possible failures associated with this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You might have a problem with unplugged cable check your electrical installation. If after looking at this clicking noise on Dodge Ram doesn’t come from your starter motor, check this article for more informations.