You notice a starter motor noise on your Dodge Journey every time you start your automobile. We can understand that this is not enjoyable and that you have inquiries. Listening such a sound is not always a good indication, but it may also be nothing serious. To help you fix this trouble, our team has chosen to compose this article to help you in this research. First, we will explain how the starter motor works on your Dodge Journey, and then what starter motor noises you can know on your Dodge Journey.
Functioning and various information
Function of a starter motor on Dodge Journey
The starter motor is an electric motor whose only task is to start the engine unit of your vehicle. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Journey is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Dodge Journey
- Do not run your starter too long
- Do not use a starter motor on Dodge Journey with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to furnish the power needed by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future component you will have to swap.
I notice noises from the starter motor of my Dodge Journey, what are the origins?
I experience a loud noise from the starter of my Dodge Journey
If you hear a starter motor noise on Dodge Journey and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which situation the gears will be worn down over time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the part responsible of the starter motor noise on your Dodge Journey swap it.
If it is a noise in the front of your vehicle but it seems to you after checking not to come from your starter, check this article about front end noise on Dodge Journey which may give you other leads to resolve your noise trouble.
I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Journey
If you notice a clicking noise at the starter motor of your Dodge Journey, there are two possible failures relating to this indicator. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a trouble with unplugged cable verify your electrical installation. If after checking out this clicking noise on Dodge Journey doesn’t come from your starter motor, check this article for more informations.
