You notice a starter motor noise on your Dodge Dart each time you start your vehicle. We can understand that this is not agreeable and that you have inquiries. Hearing such a sound is not always a good signal, but it may also be nothing severe. To help you remedy this issue, our team has chosen to compose this content page to assist you in this research. First, we will describe how the starter motor functions on your Dodge Dart, and then what starter motor noises you can encounter on your Dodge Dart.starter-motor-noise-dodge-dart

Functioning and various information

Function of a starter motor on Dodge Dart

The starter motor is an electric motor whose only function is to start the engine of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Dart is activated and turns the drive pinion on the flywheel to start the engine.

How to avoid starter motor noises on Dodge Dart

  • Do not try to start your engine for too long
  • Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn it. In fact, the current needed to make it turn and the speed of rotation only allows it to perform its function over very short and intense periods of time. If the vehicle does not start, look for the solution elsewhere.

  • Do not use a starter motor on Dodge Dart with a tired battery
  • Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power needed by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not deal with the reason of your failure to start repeatedly, your starter may be the future element you will have to change.

I notice noises from the starter motor of my Dodge Dart, what are the origins?

I experience a loud noise from the starter of my Dodge Dart

If you listen a starter motor noise on Dodge Dart and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be perfect, in which situation the gears will be worn down as time passes and will not slip and will no longer properly activate the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Dodge Dart replace it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this content page about front end noise on Dodge Dart which may offer you other leads to solve your noise issue.

I notice a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Dart

If you notice a clicking noise at the starter motor of your Dodge Dart, there are two possible failures associated with this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a issue with unplugged cable verify your electrical installation. If after checking this clicking noise on Dodge Dart doesn’t come from your starter motor, check this article for more informations.