You acknowledge a starter motor noise on your Dodge Avenger every time you start your car. We agree that this is not enjoyable and that you have questions. Finding out such a noise is not always a good signal, but it may also be nothing severe. To assist you fix this problem, our team has decided to prepare this article to help you in this research. First, we will explain how the starter motor functions on your Dodge Avenger, and then what starter motor noises you can discover on your Dodge Avenger.
Functioning and various information
Function of a starter motor on Dodge Avenger
The starter motor is an electric motor whose single task is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Dodge Avenger is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Dodge Avenger
- Do not run your starter too long
- Do not use a starter motor on Dodge Avenger with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not try to start for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is drained, you always want to start your car, the energy it is capable of holding may not be good enough to provide the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not resolve the trigger of your failure to start repeatedly, your starter may be the future component you will have to swap.
I acknowledge noises from the starter motor of my Dodge Avenger, what are the origins?
I encounter a loud noise from the starter of my Dodge Avenger
If you acknowledge a starter motor noise on Dodge Avenger and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which case the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the element responsible of the starter motor noise on your Dodge Avenger swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this article about front end noise on Dodge Avenger which may give you other leads to solve your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Dodge Avenger
If you acknowledge a clicking noise at the starter motor of your Dodge Avenger, there are two possible failures relating to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable examine your electrical installation. If after checking out this clicking noise on Dodge Avenger doesn’t come from your starter motor, check this article for more informations.
