You acknowledge a starter motor noise on your Chevrolet Traverse once you start your automobile. We can understand that this is not enjoyable and that you have questions. Hearing such a noise is not always a good sign, but it may also be nothing significant. To help you fix this trouble, our team has chosen to write this content page to help you in this research. First, we will detail how the starter motor functions on your Chevrolet Traverse, and then what starter motor noises you can notice on your Chevrolet Traverse.
Functioning and various information
Function of a starter motor on Chevrolet Traverse
The starter motor is an electric motor whose only role is to start the engine of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Traverse is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Chevrolet Traverse
- Do not try to start your engine for too long
- Do not use a starter motor on Chevrolet Traverse with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to furnish the power required by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future component you will have to change.
I acknowledge noises from the starter motor of my Chevrolet Traverse, what are the causes?
I feel a loud noise from the starter of my Chevrolet Traverse
If you perceive a starter motor noise on Chevrolet Traverse and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down with time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is responsible of the starter motor noise on your Chevrolet Traverse replace it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, read this content page about front end noise on Chevrolet Traverse which may give you other leads to eliminate your noise trouble.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Traverse
If you acknowledge a clicking noise at the starter motor of your Chevrolet Traverse, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a trouble with unplugged cable verify your electrical installation. If after looking at this clicking noise on Chevrolet Traverse doesn’t come from your starter motor, check this article for more informations.
