You hear a starter motor noise on your Chevrolet Silverado when you start your vehicle. We can understand that this is not agreeable and that you have questions. Discovering such a noise is not always a good indication, but it may also be nothing serious. To support you solve this trouble, our team has decided to write this content page to support you in this research. First, we will describe how the starter motor functions on your Chevrolet Silverado, and then what starter motor noises you can experience on your Chevrolet Silverado.
Functioning and various information
Function of a starter motor on Chevrolet Silverado
The starter motor is an electric motor whose single role is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Silverado is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Chevrolet Silverado
- Do not try to start your engine for too long
- Do not use a starter motor on Chevrolet Silverado with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be sufficient to generate the power expected by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future component you will have to replace.
I hear noises from the starter motor of my Chevrolet Silverado, what are the reasons?
I feel a loud noise from the starter of my Chevrolet Silverado
If you listen a starter motor noise on Chevrolet Silverado and you have the feeling that it is approaching a loud noise, it is possible that it is the starter motor gears that are at the source of it. Indeed, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Verify the state of the drive pinion, if it is the part responsible of the starter motor noise on your Chevrolet Silverado swap it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, check this content page about front end noise on Chevrolet Silverado which may offer you other leads to remedy your noise trouble.
I hear a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Silverado
If you hear a clicking noise at the starter motor of your Chevrolet Silverado, there are two possible failures linked to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most common ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You could have a trouble with unplugged cable check your electrical installation. If after looking at this clicking noise on Chevrolet Silverado doesn’t come from your starter motor, check this article for more informations.
