You listen a starter motor noise on your Chevrolet Colorado every time you start your car. We agree that this is not enjoyable and that you have inquiries. Discovering such a sound is not always a good signal, but it may also be nothing serious. To support you remedy this problem, our team has chosen to write this content to support you in this research. First, we will explain how the starter motor functions on your Chevrolet Colorado, and then what starter motor noises you can notice on your Chevrolet Colorado.
Functioning and various information
Function of a starter motor on Chevrolet Colorado
The starter motor is an electric motor whose sole role is to start the engine unit of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Chevrolet Colorado is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Chevrolet Colorado
- Do not run your starter too long
- Do not use a starter motor on Chevrolet Colorado with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the climate is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your car, the energy it is capable of holding may not be enough to furnish the power required by the starter motor to start your engine unit. Repeated attempts will pre-use your starter motor and if you do not deal with the reason of your failure to start repeatedly, your starter may be the future part you will have to replace.
I listen noises from the starter motor of my Chevrolet Colorado, what are the reasons?
I experience a loud noise from the starter of my Chevrolet Colorado
If you acknowledge a starter motor noise on Chevrolet Colorado and you have the feeling that it is close to a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down over time and will not slip and will no longer properly activate the engine when starting. Verify the condition of the drive pinion, if it is the part responsible of the starter motor noise on your Chevrolet Colorado change it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, consult this content about front end noise on Chevrolet Colorado which may offer you other leads to resolve your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my Chevrolet Colorado
If you listen a clicking noise at the starter motor of your Chevrolet Colorado, there are two possible failures relating to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable check your electrical installation. If after checking this clicking noise on Chevrolet Colorado doesn’t come from your starter motor, check this article for more informations.
