You experience a starter motor noise on your BMW X6 every time you start your car. We agree that this is not pleasant and that you have questions. Experiencing such a sound is not always a good signal, but it may also be nothing severe. To assist you fix this issue, our team has decided to produce this article to assist you in this research. First, we will describe how the starter motor functions on your BMW X6, and then what starter motor noises you can notice on your BMW X6.
Functioning and various information
Function of a starter motor on BMW X6
The starter motor is an electric motor whose sole role is to start the engine motor of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your BMW X6 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on BMW X6
- Do not run your starter too long
- Do not use a starter motor on BMW X6 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be enough to provide the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not treat the origin of your failure to start repeatedly, your starter may be the future part you will have to swap.
I experience noises from the starter motor of my BMW X6, what are the reasons?
I feel a loud noise from the starter of my BMW X6
If you listen a starter motor noise on BMW X6 and you have the feeling that it is close to a loud noise, it is possible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is the part responsible of the starter motor noise on your BMW X6 swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, browse this article about front end noise on BMW X6 which may give you other leads to solve your noise issue.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my BMW X6
If you experience a clicking noise at the starter motor of your BMW X6, there are two possible failures connected to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You may have a issue with unplugged cable examine your electrical installation. If after looking at this clicking noise on BMW X6 doesn’t come from your starter motor, check this article for more informations.
