You experience a starter motor noise on your Bmw X2 each time you start your automobile. We can understand that this is not pleasant and that you have inquiries. Finding out such a noise is not always a good indication, but it may also be nothing severe. To support you fix this problem, our team has decided to produce this article to help you in this research. First, we will detail how the starter motor functions on your Bmw X2, and then what starter motor noises you can know on your Bmw X2.
Functioning and various information
Function of a starter motor on Bmw X2
The starter motor is an electric motor whose single task is to start the engine of your car. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Bmw X2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Bmw X2
- Do not run your starter too long
- Do not use a starter motor on Bmw X2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn it.
Although when you have a battery that is tired, you always want to start your car, the energy it is capable of holding may not be sufficient to furnish the power expected by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not deal with the cause of your failure to start repeatedly, your starter may be the future part you will have to swap.
I experience noises from the starter motor of my Bmw X2, what are the triggers?
I feel a loud noise from the starter of my Bmw X2
If you perceive a starter motor noise on Bmw X2 and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be optimal, in which circumstance the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the part responsible of the starter motor noise on your Bmw X2 swap it.
If it is a noise in the front of your car but it seems to you after checking not to come from your starter, read this article about front end noise on Bmw X2 which may provide you other leads to eliminate your noise problem.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Bmw X2
If you experience a clicking noise at the starter motor of your Bmw X2, there are two possible failures linked to this symptom. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable check your electrical installation. If after checking out this clicking noise on Bmw X2 doesn’t come from your starter motor, check this article for more informations.
