You acknowledge a starter motor noise on your Bmw Serie 2 once you start your car. We can understand that this is not enjoyable and that you have questions. Finding out such a noise is not always a good sign, but it may also be nothing serious. To support you remedy this problem, our team has decided to compose this article content to help you in this research. First, we will describe how the starter motor functions on your Bmw Serie 2, and then what starter motor noises you can discover on your Bmw Serie 2.
Functioning and various information
Function of a starter motor on Bmw Serie 2
The starter motor is an electric motor whose only task is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link part between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Bmw Serie 2 is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Bmw Serie 2
- Do not try to start your engine for too long
- Do not use a starter motor on Bmw Serie 2 with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not try to start for more than a few seconds or you will burn it.
Although when you have a battery that is drained, you always want to start your automobile, the energy it is capable of holding may not be sufficient to generate the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not deal with the trigger of your failure to start repeatedly, your starter may be the future element you will have to change.
I acknowledge noises from the starter motor of my Bmw Serie 2, what are the triggers?
I experience a loud noise from the starter of my Bmw Serie 2
If you hear a starter motor noise on Bmw Serie 2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. In fact, often when the component has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down with time and will not slip and will no longer properly activate the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Bmw Serie 2 swap it.
If it is a noise in the front of your automobile but it seems to you after examining not to come from your starter, consult this article content about front end noise on Bmw Serie 2 which may offer you other leads to resolve your noise problem.
I acknowledge a clicking noise of the key running in my neiman but no noise at the starter motor of my Bmw Serie 2
If you acknowledge a clicking noise at the starter motor of your Bmw Serie 2, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most classic ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You could have a problem with unplugged cable verify your electrical installation. If after checking this clicking noise on Bmw Serie 2 doesn’t come from your starter motor, check this article for more informations.
