You listen a starter motor noise on your BMW 4 Series once you start your vehicle. We agree that this is not pleasant and that you have inquiries. Hearing such a noise is not always a good signal, but it may also be nothing major. To assist you fix this issue, our team has chosen to compose this content page to help you in this research. First, we will explain how the starter motor works on your BMW 4 Series, and then what starter motor noises you can notice on your BMW 4 Series.
Functioning and various information
Function of a starter motor on BMW 4 Series
The starter motor is an electric motor whose single task is to start the engine of your car. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your BMW 4 Series is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on BMW 4 Series
- Do not try to start your engine for too long
- Do not use a starter motor on BMW 4 Series with a tired battery
Even if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your car, the energy it is capable of holding may not be enough to furnish the power demanded by the starter motor to start your engine. Repeated attempts will pre-use your starter motor and if you do not treat the trigger of your failure to start repeatedly, your starter may be the future element you will have to change.
I listen noises from the starter motor of my BMW 4 Series, what are the origins?
I experience a loud noise from the starter of my BMW 4 Series
If you perceive a starter motor noise on BMW 4 Series and you have the feeling that it is approaching a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. Indeed, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be appropriate, in which situation the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the part responsible of the starter motor noise on your BMW 4 Series change it.
If it is a noise in the front of your car but it seems to you after reviewing not to come from your starter, browse this content page about front end noise on BMW 4 Series which may offer you other leads to fix your noise issue.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my BMW 4 Series
If you listen a clicking noise at the starter motor of your BMW 4 Series, there are two possible failures relating to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a issue with unplugged cable check your electrical installation. If after examining this clicking noise on BMW 4 Series doesn’t come from your starter motor, check this article for more informations.
