You listen a starter motor noise on your BENTLEY CONTINENTAL each time you start your vehicle. We can understand that this is not enjoyable and that you have inquiries. Finding out such a noise is not always a good sign, but it may also be nothing major. To support you solve this problem, our team has decided to prepare this article content to help you in this research. First, we will explain how the starter motor works on your BENTLEY CONTINENTAL , and then what starter motor noises you can encounter on your BENTLEY CONTINENTAL .
Functioning and various information
Function of a starter motor on BENTLEY CONTINENTAL
The starter motor is an electric motor whose sole job is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will launch an enormous torque that will allow it to drive the pistons of the engine that are exposed to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your BENTLEY CONTINENTAL is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on BENTLEY CONTINENTAL
- Do not try to start your engine for too long
- Do not use a starter motor on BENTLEY CONTINENTAL with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your vehicle, the energy it is capable of holding may not be enough to generate the power required by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future part you will have to change.
I listen noises from the starter motor of my BENTLEY CONTINENTAL , what are the origins?
I encounter a loud noise from the starter of my BENTLEY CONTINENTAL
If you perceive a starter motor noise on BENTLEY CONTINENTAL and you have the feeling that it is approaching a loud noise, it is plausible that it is the starter motor gears that are at the origin of it. In fact, often when the part has been dismantled for other maintenance, its adjustment in relation to the engine flywheel may no longer be perfect, in which circumstance the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Examine the state of the drive pinion, if it is the component resposible of the starter motor noise on your BENTLEY CONTINENTAL replace it.
If it is a noise in the front of your vehicle but it seems to you after reviewing not to come from your starter, consult this article content about front end noise on BENTLEY CONTINENTAL which may give you other leads to resolve your noise problem.
I listen a clicking noise of the key running in my neiman but no noise at the starter motor of my BENTLEY CONTINENTAL
If you listen a clicking noise at the starter motor of your BENTLEY CONTINENTAL , there are two possible failures linked to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a problem with unplugged cable examine your electrical installation. If after tracking this clicking noise on BENTLEY CONTINENTAL doesn’t come from your starter motor, check this article for more informations.
