You experience a starter motor noise on your Audi Q2 each time you start your vehicle. We agree that this is not enjoyable and that you have questions. Experiencing such a noise is not always a good signal, but it may also be nothing significant. To support you fix this problem, our team has decided to produce this article content to help you in this research. First, we will detail how the starter motor works on your Audi Q2, and then what starter motor noises you can experience on your Audi Q2.
Functioning and various information
Function of a starter motor on Audi Q2
The starter motor is an electric motor whose only task is to start the engine motor of your automobile. By a magnetic system and a “serial” technology, it will generate an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link element between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Audi Q2 is activated and turns the drive pinion on the flywheel to start the engine.
How to prevent starter motor noises on Audi Q2
- Do not run your starter too long
- Do not use a starter motor on Audi Q2 with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the weather conditions is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is exhausted, you always want to start your automobile, the energy it is capable of holding may not be good enough to give the power demanded by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not resolve the reason of your failure to start repeatedly, your starter may be the future element you will have to replace.
I experience noises from the starter motor of my Audi Q2, what are the triggers?
I experience a loud noise from the starter of my Audi Q2
If you acknowledge a starter motor noise on Audi Q2 and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the origin of it. In fact, often when the component has been dismantled for other fixes, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down as time passes and will not slip and will no longer properly engage the engine when starting. Check the condition of the drive pinion, if it is responsible of the starter motor noise on your Audi Q2 change it.
If it is a noise in the front of your automobile but it seems to you after reviewing not to come from your starter, read this article content about front end noise on Audi Q2 which may give you other leads to resolve your noise problem.
I experience a clicking noise of the key running in my neiman but no noise at the starter motor of my Audi Q2
If you experience a clicking noise at the starter motor of your Audi Q2, there are two possible failures connected to this sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most typical ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is concerned. You may have a problem with unplugged cable check your electrical installation. If after examining this clicking noise on Audi Q2 doesn’t come from your starter motor, check this article for more informations.
