You perceive a starter motor noise on your Acura TSX when you start your vehicle. We agree that this is not enjoyable and that you have questions. Listening such a sound is not always a good signal, but it may also be nothing significant. To assist you solve this issue, our team has chosen to compose this content page to assist you in this research. First, we will detail how the starter motor functions on your Acura TSX, and then what starter motor noises you can know on your Acura TSX.
Functioning and various information
Function of a starter motor on Acura TSX
The starter motor is an electric motor whose sole role is to start the engine motor of your vehicle. By a magnetic system and a “serial” technology, it will release an enormous torque that will allow it to drive the pistons of the engine that are subjected to enormous compression and an oil that provides additional resistance being not very fluid when cold.
It is completed by the “solenoid”. It is an electromagnet that goes under a 12 volt electric impulse to push the fork (link component between the “solenoid” and the electric motor of the starter) and thus engage the starter drive pinion on the engine flywheel. Following this action, once in engagement, the starter motor of your Acura TSX is activated and turns the drive pinion on the flywheel to start the engine.
How to avoid starter motor noises on Acura TSX
- Do not run your starter too long
- Do not use a starter motor on Acura TSX with a tired battery
Regardless if your engine does not start because of tired glow plugs, for example, or because the temperature is too cold. You should not turn your key for more than a few seconds or you will burn your starter motor.
Although when you have a battery that is empty, you always want to start your vehicle, the energy it is capable of holding may not be sufficient to provide the power needed by the starter motor to start your engine motor. Repeated attempts will pre-use your starter motor and if you do not correct the origin of your failure to start repeatedly, your starter may be the future element you will have to swap.
I perceive noises from the starter motor of my Acura TSX, what are the origins?
I feel a loud noise from the starter of my Acura TSX
If you hear a starter motor noise on Acura TSX and you have the feeling that it is close to a loud noise, it is conceivable that it is the starter motor gears that are at the source of it. Indeed, often when the part has been dismantled for other repairs, its adjustment in relation to the engine flywheel may no longer be ideal, in which situation the gears will be worn down after some time and will not slip and will no longer properly engage the engine when starting. Examine the condition of the drive pinion, if it is responsible of the starter motor noise on your Acura TSX swap it.
If it is a noise in the front of your vehicle but it seems to you after examining not to come from your starter, read this content page about front end noise on Acura TSX which may give you other leads to fix your noise issue.
I perceive a clicking noise of the key running in my neiman but no noise at the starter motor of my Acura TSX
If you perceive a clicking noise at the starter motor of your Acura TSX, there are two possible failures relating to this warning sign. If you have in addition to the noise the motor is not running, it may be the “solenoid” is not supplied with energy. One of the most traditional ways to relaunch it is to hit it with a metal bar to remove the dust that blocks it. If that is not enough, it may be the neiman who is involved. You might have a issue with unplugged cable verify your electrical installation. If after examining this clicking noise on Acura TSX doesn’t come from your starter motor, check this article for more informations.
