It is never pleasurable to notice a noise from your car you don’t know where from. Thus what if you locate a serpentine belt noise that stays on your Volkswagen California? It is extremely possible that this is a minimal problem, but before being sure, it is better to execute some checks. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you locating and solving it. First, we will look at the serpentine belt noises on your Volkswagen California and then we will check out the origins of these sounds.
I encounter noises from serpentine belt Volkswagen California
The best way to control the state of your belts is to listen to your vehicle. Immediately after you perceive sounds such as squealing or bells, you should take a closer look to examine their source. The task of the serpentine belt or driving belt of your Volkswagen California is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal operation of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I notice squealing noises on my serpentine belt Volkswagen California
This sort of squealing belt noises on Volkswagen California, which will often be acute, can commonly happen when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is often quite simple to relate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to locate a belt noise on your Volkswagen California. The reason of this problem can be linked to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Volkswagen California is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the state of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Volkswagen California
Just like squealing, a driving belt noise on your Volkswagen California that sounds like a loud grinding sound can say a lot about its state. It is therefore imperative that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Remember to examine first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Volkswagen California
Finally, if in your case you recognize a bearing belt noise on Volkswagen California, it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Volkswagen California which could maybe help you.
