It is never pleasant to listen to a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that remains on your Toyota Auris 2? It is extremely plausible that this is a minor problem, but before being sure, it is better to conduct some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a content to support you finding and correcting it. First, we will look at the serpentine belt noises on your Toyota Auris 2 and then we will check out the origins of these sounds.
I feel noises from serpentine belt Toyota Auris 2
The best strategy to control the condition of your belts is to listen to your vehicle. As soon as you perceive sounds such as squealing or bells, you should take a closer look to check their origin. The function of the serpentine belt or driving belt of your Toyota Auris 2 is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal general performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine components at variable speeds.
I listen to squealing noises on my serpentine belt Toyota Auris 2
This kind of squealing belt noises on Toyota Auris 2, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is often quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to identify a belt noise on your Toyota Auris 2. The cause of this problem can be connected to the damper pulley, which operates as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this phenomenon is annodine. As the serpentine belt of your Toyota Auris 2 is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Toyota Auris 2
Just like squealing, a driving belt noise on your Toyota Auris 2 that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore essential that you look further and locate the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Make sure to check first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Toyota Auris 2
Finally, if in your case you identify a bearing belt noise on Toyota Auris 2, it is plausible that it is connected to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Toyota Auris 2 which could maybe help you.
