It is never pleasurable to listen to a noise from your car you don’t know where from. Then what if you identify a serpentine belt noise that remains on your Suzuki Alto? It is highly conceivable that this is a minor issue, but before being sure, it is better to conduct some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you locating and solving it. First, we will look at the serpentine belt noises on your Suzuki Alto and then we will take a look at the origins of these noises.
I experience noises from serpentine belt Suzuki Alto
The best technique to control the condition of your belts is to listen to your car. As soon as you perceive noises such as squealing or bells, you should take a closer look to examine their origin. The function of the serpentine belt or driving belt of your Suzuki Alto is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal general performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine components at variable speeds.
I listen to squealing noises on my serpentine belt Suzuki Alto
This type of squealing belt noises on Suzuki Alto, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be significant and it is often quite simple to link it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to point a belt noise on your Suzuki Alto. The reason of this issue can be in connection with the damper pulley, which operates as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Suzuki Alto is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Suzuki Alto
Just like squealing, a driving belt noise on your Suzuki Alto that sounds like a loud grinding sound can say a lot about its condition. It is therefore essential that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Don’t forget to examine first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to swap the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Suzuki Alto
Finally, if in your case you identify a bearing belt noise on Suzuki Alto, it is conceivable that it is in connection with a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Suzuki Alto which could maybe help you.
