It is never relaxing to find out a noise from your car you don’t know where from. So what if you notice a serpentine belt noise that remains on your Renault Twingo 2? It is very possible that this is a unimportant problem, but before being sure, it is better to execute some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you locating and repairing it. First, we will look at the serpentine belt noises on your Renault Twingo 2 and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Renault Twingo 2
The best method to control the condition of your belts is to listen to your vehicle. Immediately after you perceive noises such as squealing or bells, you should take a closer look to check their source. The function of the serpentine belt or driving belt of your Renault Twingo 2 is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine elements at variable speeds.
I find out squealing noises on my serpentine belt Renault Twingo 2
This sort of squealing belt noises on Renault Twingo 2, which will often be acute, can usually appear when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is normally quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to identify a belt noise on your Renault Twingo 2. The reason of this problem can be linked to the damper pulley, which functions as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Renault Twingo 2 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Renault Twingo 2
Just like squealing, a driving belt noise on your Renault Twingo 2 that sounds like a loud grinding sound can express a lot about its condition. It is therefore important that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Make sure you check first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to replace the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Renault Twingo 2
Finally, if in your case you recognize a bearing belt noise on Renault Twingo 2, it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Renault Twingo 2 which could maybe help you.
