It is never pleasurable to listen to a noise from your car you don’t know where from. So what if you discover a serpentine belt noise that persists on your Renault Clio 4? It is extremely conceivable that this is a minor issue, but before being sure, it is better to accomplish some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you finding and correcting it. First, we will look at the serpentine belt noises on your Renault Clio 4 and then we will check out the origins of these sounds.
I feel noises from serpentine belt Renault Clio 4
The best method to check the condition of your belts is to listen to your vehicle. Immediately after you recognise sounds such as squealing or bells, you should take a closer look to verify their source. The role of the serpentine belt or driving belt of your Renault Clio 4 is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine elements at variable speeds.
I listen to squealing noises on my serpentine belt Renault Clio 4
This sort of squealing belt noises on Renault Clio 4, which will often be acute, can mostly appear when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be significant and it is normally quite simple to connect it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to spot a belt noise on your Renault Clio 4. The cause of this issue can be related to the damper pulley, which operates as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this event is annodine. As the serpentine belt of your Renault Clio 4 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Renault Clio 4
Just like squealing, a driving belt noise on your Renault Clio 4 that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore necessary that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Remember to verify first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Renault Clio 4
Finally, if in your case you recognize a bearing belt noise on Renault Clio 4, it is conceivable that it is related to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Renault Clio 4 which could maybe help you.
