It is never relaxing to hear a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that persists on your Renault Clio 2? It is highly possible that this is a minor issue, but before being sure, it is better to conduct some investigations. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you finding and fixing it. First, we will look at the serpentine belt noises on your Renault Clio 2 and then we will take a look at the sources of these noises.
I encounter noises from serpentine belt Renault Clio 2
The best strategy to check the state of your belts is to listen to your vehicle. As soon as you recognise noises such as squealing or bells, you should take a closer look to verify their origin. The task of the serpentine belt or driving belt of your Renault Clio 2 is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal operation of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.
I hear squealing noises on my serpentine belt Renault Clio 2
This kind of squealing belt noises on Renault Clio 2, which will often be acute, can commonly arise when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be heavy and it is obviously quite simple to link it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to identify a belt noise on your Renault Clio 2. The reason of this issue can be connected to the damper pulley, which operates as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Renault Clio 2 is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to verify the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I hear loud serpentine or driving belt noises Renault Clio 2
Just like squealing, a driving belt noise on your Renault Clio 2 that sounds like a loud grinding sound can express a lot about its state. It is therefore imperative that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Don’t forget to verify first the serpentine/driving belt which in most cases is the reason of this issue, otherwise it will be necessary to change the tensioner or pulley.
I hear bearing noises on the serpentine belt of my Renault Clio 2
Finally, if in your case you distinguish a bearing belt noise on Renault Clio 2, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses alternatives, you still detect a belt noises, read our article about timing belt noises on Renault Clio 2 which could maybe help you.
