It is never relaxing to find out a noise from your car you don’t know where from. So what if you locate a serpentine belt noise that remains on your Peugeot Partner? It is extremely possible that this is a minor trouble, but before being sure, it is better to operate some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you finding and fixing it. First, we will look at the serpentine belt noises on your Peugeot Partner and then we will look at the sources of these noises.
I experience noises from serpentine belt Peugeot Partner
The best strategy to check the condition of your belts is to listen to your vehicle. As soon as you detect noises such as squealing or bells, you should take a closer look to examine their origin. The role of the serpentine belt or driving belt of your Peugeot Partner is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine elements at variable speeds.
I find out squealing noises on my serpentine belt Peugeot Partner
This kind of squealing belt noises on Peugeot Partner, which will often be acute, can generally happen when the engine is cold, or when the acceleration increases in intensity. . This kind of noise must be heavy and it is often quite simple to relate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to identify a belt noise on your Peugeot Partner. The cause of this trouble can be in connection with the damper pulley, which works as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Peugeot Partner is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Peugeot Partner
Just like squealing, a driving belt noise on your Peugeot Partner that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore imperative that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure you examine first the serpentine/driving belt which in most cases is the cause of this trouble, otherwise it will be necessary to change the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Peugeot Partner
Finally, if in your case you identify a bearing belt noise on Peugeot Partner, it is possible that it is in connection with a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to replace it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Peugeot Partner which could maybe help you.
