It is never relaxing to discover a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that persists on your Peugeot Bipper? It is highly conceivable that this is a unimportant problem, but before being sure, it is better to accomplish some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a content to support you locating and fixing it. First, we will look at the serpentine belt noises on your Peugeot Bipper and then we will look at the origins of these sounds.
I experience noises from serpentine belt Peugeot Bipper
The best strategy to control the condition of your belts is to listen to your car. As soon as you detect sounds such as squealing or bells, you should take a closer look to examine their origin. The role of the serpentine belt or driving belt of your Peugeot Bipper is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore essential in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I discover squealing noises on my serpentine belt Peugeot Bipper
This kind of squealing belt noises on Peugeot Bipper, which will often be acute, can generally appear when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be significant and it is normally quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to point a belt noise on your Peugeot Bipper. The cause of this problem can be in connection with the damper pulley, which functions as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Peugeot Bipper is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Peugeot Bipper
Just like squealing, a driving belt noise on your Peugeot Bipper that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore essential that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Make sure to examine first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to swap the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Peugeot Bipper
Finally, if in your case you identify a bearing belt noise on Peugeot Bipper, it is conceivable that it is in connection with a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Peugeot Bipper which could maybe help you.
