It is never enjoyable to listen to a noise from your car you don’t know where from. Thus what if you detect a serpentine belt noise that remains on your Peugeot 806? It is extremely conceivable that this is a minor trouble, but before being sure, it is better to execute some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a document to support you finding and correcting it. First, we will look at the serpentine belt noises on your Peugeot 806 and then we will look at the origins of these sounds.
I encounter noises from serpentine belt Peugeot 806
The best method to check the condition of your belts is to listen to your car. As soon as you recognize sounds such as squealing or bells, you should take a closer look to examine their source. The function of the serpentine belt or driving belt of your Peugeot 806 is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal overall performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine parts at variable speeds.
I listen to squealing noises on my serpentine belt Peugeot 806
This sort of squealing belt noises on Peugeot 806, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be heavy and it is often quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to locate a belt noise on your Peugeot 806. The reason of this trouble can be linked to the damper pulley, which works as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this event is annodine. As the serpentine belt of your Peugeot 806 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Peugeot 806
Just like squealing, a driving belt noise on your Peugeot 806 that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore essential that you look further and locate the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Make sure to examine first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to change the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Peugeot 806
Finally, if in your case you distinguish a bearing belt noise on Peugeot 806, it is conceivable that it is linked to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on Peugeot 806 which could maybe help you.
