It is never pleasurable to hear a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that remains on your Peugeot 5008? It is highly possible that this is a unimportant problem, but before being sure, it is better to accomplish some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a page to help you finding and correcting it. First, we will look at the serpentine belt noises on your Peugeot 5008 and then we will check out the sources of these noises.
I encounter noises from serpentine belt Peugeot 5008
The best way to control the condition of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to examine their origin. The task of the serpentine belt or driving belt of your Peugeot 5008 is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore vital in the normal operation of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.
I hear squealing noises on my serpentine belt Peugeot 5008
This sort of squealing belt noises on Peugeot 5008, which will often be acute, can mostly happen when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is normally quite simple to link it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to spot a belt noise on your Peugeot 5008. The reason of this problem can be related to the damper pulley, which works as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Peugeot 5008 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I hear loud serpentine or driving belt noises Peugeot 5008
Just like squealing, a driving belt noise on your Peugeot 5008 that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore necessary that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Remember to examine first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to swap the tensioner or pulley.
I hear bearing noises on the serpentine belt of my Peugeot 5008
Finally, if in your case you recognize a bearing belt noise on Peugeot 5008, it is possible that it is related to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on Peugeot 5008 which could maybe help you.
