It is never pleasant to perceive a noise from your car you don’t know where from. Thus what if you discover a serpentine belt noise that stays on your Peugeot 4008? It is very conceivable that this is a minimal trouble, but before being sure, it is better to carry out some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you locating and repairing it. First, we will look at the serpentine belt noises on your Peugeot 4008 and then we will check out the sources of these noises.
I experience noises from serpentine belt Peugeot 4008
The best way to control the condition of your belts is to listen to your automobile. As soon as you recognize noises such as squealing or bells, you should take a closer look to examine their source. The function of the serpentine belt or driving belt of your Peugeot 4008 is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine components at variable speeds.
I perceive squealing noises on my serpentine belt Peugeot 4008
This type of squealing belt noises on Peugeot 4008, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be heavy and it is often quite simple to relate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being apparent, it should not be too difficult for you to locate a belt noise on your Peugeot 4008. The reason of this trouble can be connected to the damper pulley, which acts as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Peugeot 4008 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.
I perceive loud serpentine or driving belt noises Peugeot 4008
Just like squealing, a driving belt noise on your Peugeot 4008 that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore important that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Make sure to examine first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to replace the tensioner or pulley.
I perceive bearing noises on the serpentine belt of my Peugeot 4008
Finally, if in your case you recognize a bearing belt noise on Peugeot 4008, it is conceivable that it is connected to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still identify a belt noises, read our article about timing belt noises on Peugeot 4008 which could maybe help you.