It is never relaxing to hear a noise from your car you don’t know where from. So what if you detect a serpentine belt noise that persists on your Land Rover LR4? It is highly conceivable that this is a minor problem, but before being sure, it is better to carry out some checks. If this belt noise comes from your serpentine or driving belt, our team has written an article to support you finding and solving it. First, we will look at the serpentine belt noises on your Land Rover LR4 and then we will check out the origins of these noises.serpentine-belt-noise-land-rover-lr4

I feel noises from serpentine belt Land Rover LR4

The best technique to control the condition of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to examine their origin. The task of the serpentine belt or driving belt of your Land Rover LR4 is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal general performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.

I hear squealing noises on my serpentine belt Land Rover LR4

This type of squealing belt noises on Land Rover LR4, which will often be acute, can usually arise when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be heavy and it is often quite simple to connect it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to point a belt noise on your Land Rover LR4. The reason of this problem can be connected to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this phenomenon is annodine. As the serpentine belt of your Land Rover LR4 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to examine the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.

I hear loud serpentine or driving belt noises Land Rover LR4

Just like squealing, a driving belt noise on your Land Rover LR4 that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore imperative that you look further and find the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Remember to examine first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to swap the tensioner or pulley.

I hear bearing noises on the serpentine belt of my Land Rover LR4

Finally, if in your case you discern a bearing belt noise on Land Rover LR4, it is conceivable that it is connected to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still detect a belt noises, read our article about timing belt noises on Land Rover LR4 which could maybe help you.