It is never enjoyable to notice a noise from your car you don’t know where from. Then what if you detect a serpentine belt noise that persists on your Kia Sorento? It is extremely plausible that this is a unimportant problem, but before being sure, it is better to accomplish some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and correcting it. First, we will look at the serpentine belt noises on your Kia Sorento and then we will check out the origins of these noises.serpentine-belt-noise-kia-sorento

I feel noises from serpentine belt Kia Sorento

The best way to check the state of your belts is to listen to your vehicle. As soon as you detect noises such as squealing or bells, you should take a closer look to check their source. The task of the serpentine belt or driving belt of your Kia Sorento is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal operation of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine components at variable speeds.

I notice squealing noises on my serpentine belt Kia Sorento

This kind of squealing belt noises on Kia Sorento, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be heavy and it is normally quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to identify a belt noise on your Kia Sorento. The cause of this problem can be linked to the damper pulley, which operates as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have a chance that this event is annodine. As the serpentine belt of your Kia Sorento is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to check the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.

I notice loud serpentine or driving belt noises Kia Sorento

Just like squealing, a driving belt noise on your Kia Sorento that sounds like a loud grinding sound can reveal a lot about its state. It is therefore necessary that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Remember to check first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to swap the tensioner or pulley.

I notice bearing noises on the serpentine belt of my Kia Sorento

Finally, if in your case you discern a bearing belt noise on Kia Sorento, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on Kia Sorento which could maybe help you.