It is never relaxing to notice a noise from your car you don’t know where from. So what if you detect a serpentine belt noise that remains on your Hyundai Sonata? It is highly plausible that this is a insignificant trouble, but before being sure, it is better to conduct some checks. If this belt noise comes from your serpentine or driving belt, our team has written an article to help you locating and fixing it. First, we will look at the serpentine belt noises on your Hyundai Sonata and then we will look at the origins of these noises.serpentine-belt-noise-hyundai-sonata

I feel noises from serpentine belt Hyundai Sonata

The best strategy to control the state of your belts is to listen to your vehicle. As soon as you perceive noises such as squealing or bells, you should take a closer look to check their source. The role of the serpentine belt or driving belt of your Hyundai Sonata is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal use of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine elements at variable speeds.

I notice squealing noises on my serpentine belt Hyundai Sonata

This kind of squealing belt noises on Hyundai Sonata, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This kind of sound must be heavy and it is obviously quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to spot a belt noise on your Hyundai Sonata. The reason of this trouble can be related to the damper pulley, which acts as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Hyundai Sonata is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to check the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.

I notice loud serpentine or driving belt noises Hyundai Sonata

Just like squealing, a driving belt noise on your Hyundai Sonata that sounds like a loud grinding sound can reveal a lot about its state. It is therefore imperative that you look further and locate the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this trouble. Make sure you check first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.

I notice bearing noises on the serpentine belt of my Hyundai Sonata

Finally, if in your case you identify a bearing belt noise on Hyundai Sonata, it is plausible that it is related to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on Hyundai Sonata which could maybe help you.