It is never enjoyable to discover a noise from your car you don’t know where from. So what if you detect a serpentine belt noise that persists on your Hyundai Kona? It is very possible that this is a minor problem, but before being sure, it is better to conduct some checks. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you locating and correcting it. First, we will look at the serpentine belt noises on your Hyundai Kona and then we will look at the sources of these noises.
I feel noises from serpentine belt Hyundai Kona
The best technique to control the condition of your belts is to listen to your car. Immediately after you detect noises such as squealing or bells, you should take a closer look to check their source. The role of the serpentine belt or driving belt of your Hyundai Kona is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal overall performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine parts at variable speeds.
I discover squealing noises on my serpentine belt Hyundai Kona
This type of squealing belt noises on Hyundai Kona, which will often be acute, can in most cases occur when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be significant and it is often quite simple to connect it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being apparent, it should not be too complicated for you to identify a belt noise on your Hyundai Kona. The reason of this problem can be connected to the damper pulley, which works as a damper to reduce irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Hyundai Kona is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I discover loud serpentine or driving belt noises Hyundai Kona
Just like squealing, a driving belt noise on your Hyundai Kona that sounds like a loud grinding sound can tell you a lot about its condition. It is therefore important that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Make sure to check first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to change the tensioner or pulley.
I discover bearing noises on the serpentine belt of my Hyundai Kona
Finally, if in your case you discern a bearing belt noise on Hyundai Kona, it is possible that it is connected to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses alternatives, you still perceive a belt noises, read our article about timing belt noises on Hyundai Kona which could maybe help you.
