It is never pleasurable to find out a noise from your car you don’t know where from. Then what if you identify a serpentine belt noise that stays on your Honda Accord? It is extremely possible that this is a unimportant problem, but before being sure, it is better to carry out some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a post to help you locating and solving it. First, we will look at the serpentine belt noises on your Honda Accord and then we will look at the sources of these sounds.serpentine-belt-noise-honda-accord

I feel noises from serpentine belt Honda Accord

The best strategy to check the condition of your belts is to listen to your car. Immediately after you perceive sounds such as squealing or bells, you should take a closer look to check their source. The role of the serpentine belt or driving belt of your Honda Accord is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.

I find out squealing noises on my serpentine belt Honda Accord

This sort of squealing belt noises on Honda Accord, which will often be acute, can commonly happen when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be heavy and it is obviously quite simple to associate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to point a belt noise on your Honda Accord. The reason of this problem can be linked to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your Honda Accord is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to check the condition of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.

I find out loud serpentine or driving belt noises Honda Accord

Just like squealing, a driving belt noise on your Honda Accord that sounds like a loud grinding sound can say a lot about its condition. It is therefore imperative that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this problem. Make sure you check first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to swap the tensioner or pulley.

I find out bearing noises on the serpentine belt of my Honda Accord

Finally, if in your case you discern a bearing belt noise on Honda Accord, it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still identify a belt noises, read our article about timing belt noises on Honda Accord which could maybe help you.