It is never pleasant to notice a noise from your car you don’t know where from. Thus what if you identify a serpentine belt noise that persists on your Dodge Ram? It is very plausible that this is a minor problem, but before being sure, it is better to carry out some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a document to help you finding and correcting it. First, we will look at the serpentine belt noises on your Dodge Ram and then we will check out the origins of these sounds.serpentine-belt-noise-dodge-ram

I feel noises from serpentine belt Dodge Ram

The best strategy to control the condition of your belts is to listen to your car. As soon as you perceive sounds such as squealing or bells, you should take a closer look to verify their origin. The role of the serpentine belt or driving belt of your Dodge Ram is to transmit the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal operation of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.

I notice squealing noises on my serpentine belt Dodge Ram

This sort of squealing belt noises on Dodge Ram, which will often be acute, can generally arise when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be significant and it is obviously quite simple to link it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to point a belt noise on your Dodge Ram. The reason of this problem can be linked to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Dodge Ram is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the condition of your belt (crack, crack), if this is the case replace it, otherwise simply tighten the belt.

I notice loud serpentine or driving belt noises Dodge Ram

Just like squealing, a driving belt noise on your Dodge Ram that sounds like a loud grinding sound can express a lot about its condition. It is therefore essential that you look further and locate the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Make sure you verify first the serpentine/driving belt which in most cases is the reason of this problem, otherwise it will be necessary to replace the tensioner or pulley.

I notice bearing noises on the serpentine belt of my Dodge Ram

Finally, if in your case you discern a bearing belt noise on Dodge Ram, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still notice a belt noises, read our article about timing belt noises on Dodge Ram which could maybe help you.