It is never enjoyable to listen to a noise from your car you don’t know where from. Thus what if you discover a serpentine belt noise that remains on your Dodge Nitro? It is extremely plausible that this is a minor trouble, but before being sure, it is better to carry out some inspections. If this belt noise comes from your serpentine or driving belt, our team has written a post to support you locating and fixing it. First, we will look at the serpentine belt noises on your Dodge Nitro and then we will check out the origins of these noises.
I feel noises from serpentine belt Dodge Nitro
The best way to control the state of your belts is to listen to your automobile. Immediately after you perceive noises such as squealing or bells, you should take a closer look to verify their origin. The function of the serpentine belt or driving belt of your Dodge Nitro is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal general performance of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine components at variable speeds.
I listen to squealing noises on my serpentine belt Dodge Nitro
This type of squealing belt noises on Dodge Nitro, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This type of noise must be heavy and it is obviously quite simple to relate it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being accessible, it should not be too difficult for you to spot a belt noise on your Dodge Nitro. The reason of this trouble can be linked to the damper pulley, which works as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this event is annodine. As the serpentine belt of your Dodge Nitro is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to verify the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Dodge Nitro
Just like squealing, a driving belt noise on your Dodge Nitro that sounds like a loud grinding sound can say a lot about its state. It is therefore essential that you look further and find the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure you verify first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Dodge Nitro
Finally, if in your case you distinguish a bearing belt noise on Dodge Nitro, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Dodge Nitro which could maybe help you.
