It is never pleasant to find out a noise from your car you don’t know where from. So what if you identify a serpentine belt noise that remains on your Dodge Charger? It is highly possible that this is a unimportant issue, but before being sure, it is better to operate some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a page to support you locating and solving it. First, we will look at the serpentine belt noises on your Dodge Charger and then we will take a look at the sources of these sounds.
I experience noises from serpentine belt Dodge Charger
The best technique to check the condition of your belts is to listen to your car. Immediately after you perceive sounds such as squealing or bells, you should take a closer look to check their origin. The role of the serpentine belt or driving belt of your Dodge Charger is to transfer the movement of the engine to the secondary parts that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore critical in the normal performance of your car. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive distinctive engine parts at variable speeds.
I find out squealing noises on my serpentine belt Dodge Charger
This sort of squealing belt noises on Dodge Charger, which will often be acute, can in most cases arise when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be heavy and it is often quite simple to link it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to identify a belt noise on your Dodge Charger. The cause of this issue can be in connection with the damper pulley, which functions as a damper to eliminate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this event is annodine. As the serpentine belt of your Dodge Charger is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Keep in mind to check the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises Dodge Charger
Just like squealing, a driving belt noise on your Dodge Charger that sounds like a loud grinding sound can say a lot about its condition. It is therefore necessary that you look further and find the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this issue. Remember to check first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.
I find out bearing noises on the serpentine belt of my Dodge Charger
Finally, if in your case you recognize a bearing belt noise on Dodge Charger, it is possible that it is in connection with a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Dodge Charger which could maybe help you.
