It is never relaxing to notice a noise from your car you don’t know where from. Then what if you notice a serpentine belt noise that remains on your Chevrolet Spark? It is extremely plausible that this is a insignificant issue, but before being sure, it is better to operate some investigations. If this belt noise comes from your serpentine or driving belt, our team has written an article to support you finding and correcting it. First, we will look at the serpentine belt noises on your Chevrolet Spark and then we will check out the sources of these noises.
I feel noises from serpentine belt Chevrolet Spark
The best way to check the condition of your belts is to listen to your vehicle. Immediately after you find noises such as squealing or bells, you should take a closer look to examine their source. The job of the serpentine belt or driving belt of your Chevrolet Spark is to transmit the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal general performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive distinctive engine components at variable speeds.
I notice squealing noises on my serpentine belt Chevrolet Spark
This sort of squealing belt noises on Chevrolet Spark, which will often be acute, can commonly arise when the engine is cold, or when the acceleration increases in intensity. . This sort of sound must be heavy and it is often quite simple to relate it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the source of this noise, the serpentine or driving belt being accessible, it should not be too complicated for you to identify a belt noise on your Chevrolet Spark. The cause of this issue can be linked to the damper pulley, which works as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Chevrolet Spark is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to examine the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I notice loud serpentine or driving belt noises Chevrolet Spark
Just like squealing, a driving belt noise on your Chevrolet Spark that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore imperative that you look further and locate the reason for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the source of this issue. Make sure you examine first the serpentine/driving belt which in most cases is the cause of this issue, otherwise it will be necessary to change the tensioner or pulley.
I notice bearing noises on the serpentine belt of my Chevrolet Spark
Finally, if in your case you recognize a bearing belt noise on Chevrolet Spark, it is plausible that it is linked to a serpentine belt that is too tight . Indeed, it is plausible that its size may be smaller than suggested and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Chevrolet Spark which could maybe help you.
