It is never pleasant to listen to a noise from your car you don’t know where from. Then what if you discover a serpentine belt noise that remains on your Bmw Serie 6? It is extremely conceivable that this is a insignificant problem, but before being sure, it is better to carry out some verifications. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and repairing it. First, we will look at the serpentine belt noises on your Bmw Serie 6 and then we will check out the sources of these sounds.
I encounter noises from serpentine belt Bmw Serie 6
The best method to check the condition of your belts is to listen to your automobile. Immediately after you recognize sounds such as squealing or bells, you should take a closer look to check their origin. The role of the serpentine belt or driving belt of your Bmw Serie 6 is to transfer the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore fundamental in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine elements at variable speeds.
I listen to squealing noises on my serpentine belt Bmw Serie 6
This type of squealing belt noises on Bmw Serie 6, which will often be acute, can in most cases appear when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be heavy and it is obviously quite simple to relate it with one of these belts. To check, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being visible, it should not be too difficult for you to identify a belt noise on your Bmw Serie 6. The cause of this problem can be related to the damper pulley, which acts as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the opportunity that this phenomenon is annodine. As the serpentine belt of your Bmw Serie 6 is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Remember to check the condition of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I listen to loud serpentine or driving belt noises Bmw Serie 6
Just like squealing, a driving belt noise on your Bmw Serie 6 that sounds like a loud grinding sound can reveal a lot about its condition. It is therefore imperative that you look further and find the cause for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this problem. Remember to check first the serpentine/driving belt which in most cases is the cause of this problem, otherwise it will be necessary to change the tensioner or pulley.
I listen to bearing noises on the serpentine belt of my Bmw Serie 6
Finally, if in your case you recognize a bearing belt noise on Bmw Serie 6, it is conceivable that it is related to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than prescribed and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still perceive a belt noises, read our article about timing belt noises on Bmw Serie 6 which could maybe help you.
