It is never pleasurable to find out a noise from your car you don’t know where from. Then what if you notice a serpentine belt noise that stays on your BENTLEY CONTINENTAL ? It is very possible that this is a minimal trouble, but before being sure, it is better to carry out some inspections. If this belt noise comes from your serpentine or driving belt, our team has written an article to support you locating and fixing it. First, we will look at the serpentine belt noises on your BENTLEY CONTINENTAL and then we will take a look at the origins of these sounds.
I encounter noises from serpentine belt BENTLEY CONTINENTAL
The best way to control the state of your belts is to listen to your automobile. As soon as you recognize sounds such as squealing or bells, you should take a closer look to examine their origin. The job of the serpentine belt or driving belt of your BENTLEY CONTINENTAL is to transmit the movement of the engine to the secondary elements that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal use of your automobile. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the ability to drive different engine elements at variable speeds.
I find out squealing noises on my serpentine belt BENTLEY CONTINENTAL
This sort of squealing belt noises on BENTLEY CONTINENTAL , which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This sort of noise must be significant and it is normally quite simple to link it with one of these belts. To examine, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too difficult for you to locate a belt noise on your BENTLEY CONTINENTAL . The reason of this trouble can be linked to the damper pulley, which operates as a damper to eradicate irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have the possibility that this phenomenon is annodine. As the serpentine belt of your BENTLEY CONTINENTAL is exposed, it may squeak due to excessive humidity due to weather conditions and it may end with a change in conditions. Remember to examine the state of your belt (crack, crack), if this is the case change it, otherwise simply tighten the belt.
I find out loud serpentine or driving belt noises BENTLEY CONTINENTAL
Just like squealing, a driving belt noise on your BENTLEY CONTINENTAL that sounds like a loud grinding sound can reveal a lot about its state. It is therefore essential that you look further and locate the reason for this sound that can signal the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven properly. Other alternatives, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure to examine first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to change the tensioner or pulley.
I find out bearing noises on the serpentine belt of my BENTLEY CONTINENTAL
Finally, if in your case you recognize a bearing belt noise on BENTLEY CONTINENTAL , it is possible that it is linked to a serpentine belt that is too tight . Indeed, it is possible that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The problem in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to change it if it is too short. If after checking all thoses alternatives, you still notice a belt noises, read our article about timing belt noises on BENTLEY CONTINENTAL which could maybe help you.
