It is never pleasurable to perceive a noise from your car you don’t know where from. Thus what if you detect a serpentine belt noise that remains on your Acura TL? It is highly conceivable that this is a minimal trouble, but before being sure, it is better to operate some investigations. If this belt noise comes from your serpentine or driving belt, our team has written a content to help you locating and solving it. First, we will look at the serpentine belt noises on your Acura TL and then we will look at the sources of these sounds.serpentine-belt-noise-acura-tl

I feel noises from serpentine belt Acura TL

The best method to check the state of your belts is to listen to your vehicle. As soon as you perceive sounds such as squealing or bells, you should take a closer look to verify their origin. The role of the serpentine belt or driving belt of your Acura TL is to transfer the movement of the engine to the secondary components that it will supply with energy. Like steering, air conditioning, water pump. Its role is therefore important in the normal performance of your vehicle. The serpentine belt is said to be asynchronous, i.e. unlike the timing belt, it has the capacity to drive different engine components at variable speeds.

I perceive squealing noises on my serpentine belt Acura TL

This type of squealing belt noises on Acura TL, which will often be acute, can commonly appear when the engine is cold, or when the acceleration increases in intensity. . This type of sound must be significant and it is often quite simple to connect it with one of these belts. To verify, do not hesitate to open your bonnet, engine running cold and check the origin of this noise, the serpentine or driving belt being exposed, it should not be too complicated for you to identify a belt noise on your Acura TL. The reason of this trouble can be connected to the damper pulley, which acts as a damper to get rid of irregularities in the tension in the motor cycle and therefore in the energy transmission to the belt. This results in a loose belt that will jerk. However, you still have an opportunity that this phenomenon is annodine. As the serpentine belt of your Acura TL is exposed, it may squeak due to excessive humidity due to weather conditions and it may stop with a change in conditions. Keep in mind to verify the state of your belt (crack, crack), if this is the case swap it, otherwise simply tighten the belt.

I perceive loud serpentine or driving belt noises Acura TL

Just like squealing, a driving belt noise on your Acura TL that sounds like a loud grinding sound can reveal a lot about its state. It is therefore essential that you look further and find the cause for this sound that can indicate the end of your belt’s life. Like squealing noise, it can be identified in most cases when cold . It generally means a worn pulley whose streaks no longer allow it to be driven correctly. Other possibilities, the dynamic belt tensioner or the disengageable pulley of the alternator may be at the origin of this trouble. Make sure to verify first the serpentine/driving belt which in most cases is the reason of this trouble, otherwise it will be necessary to swap the tensioner or pulley.

I perceive bearing noises on the serpentine belt of my Acura TL

Finally, if in your case you recognize a bearing belt noise on Acura TL, it is conceivable that it is connected to a serpentine belt that is too tight . Indeed, it is conceivable that its size may be smaller than recommended and cause the entire system to overvoltage, resulting in this whistling noise or slight rolling noise. The risk in this case is that the bearing bearings or the Damper pulley may fail . Remember, therefore, to stretch the belt to limit the risks or to swap it if it is too short. If after checking all thoses possibilities, you still detect a belt noises, read our article about timing belt noises on Acura TL which could maybe help you.