Experiencing noises from your car is never pleasant. Specifically persistent noises such as rubbing noises on Ram P/U that will disturb you and prevent you from traveling in the usual quiet environment that your car provides you. If you hear rubbing noise on Ram P/U, you are in the right place, our team has decided to prepare this content page to help you locate the source and stop it. This is why, first of all, we will look at the rubbing noises that can arise when you drive with your Ram P/U, and secondly, the rubbing noises that come from your engine block.rubbing-noise-ram-p/u

I listen to a rubbing noise on Ram P/U once I drive

Noise of rubbing from wheels

First, we will look into rubbing noises that can be connected to wheel, be aware that in this content we will only explore the most common triggers of rubbing noises on Ram P/U associated with your wheels, if you desire a full guide on wheel noise on Ram P/U, it’s here.

  • Rubbing noise originating from your bearing
  • One of the other probable triggers of rubbing noise symptoms on your Ram P/U, may be that one of your bearing is tired, it will commonly produce a loud noise that increases when stressed (turns faster and faster). So please remember to examine by taking speed (neutral gear and window open to pay attention only to noise of the wheels) that the noise is well based here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, examine this article on Ancre_loud_noise, you will most likely find a solution to your trouble.

  • Brake noise
  • If you encounter a rubbing noise on Ram P/U and you have the feeling that it comes from your wheels, it is highly plausible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will make a strong metallic friction noise that you will inevitably feel. To examine this, put your car on safety stand, and examine the state of your discs and pads by getting rid of the wheel. If they are involved, swap them as soon as possible , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want informations about it, read this guide for more info about brake noises on Ram P/U.

    Noise of rubbing from under the car

    Finally, a rubbing noise on your Ram P/U from the lower part of the chassis may be connected to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In such a case, you must examine, when cold, that the exhaust holds well, to perform this try to make it move in different angles and check out how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually examine the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In this instance it will have to be swapped. If your exhaust is the reason of this exhaust noise on Ram P/U, but the silent blocks are not the reason, consult this guide to find the reason.

    I listen to a rubbing noise on Ram P/U coming from the engine

    If it approaches an engine noise rubbing on Ram P/U, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So examine the state and try to find the exact origin of this noise by positioning someone at the engine at idle, and if this noise is more likely to happen in rpm, accelerate and position someone at the engine block to detect the area of origin of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also remember to examine the state of your belts, and swap them if required because it is the health of your car that is at stake. If you encounter belt noises on Ram P/U, we recommend that you read this content page for more details on this subject.