Listening noises from your car is never pleasurable. Specifically repeated noises such as rubbing noises on Nissan Micra 4 that will disturb you and prevent you from traveling in the normal quiet environment that your car gives you. If you are the subject of rubbing noise on Nissan Micra 4, you are in the right place, our editorial staff has decided to compose this article to help you find the origin and stop it. This is why, first of all, we will focus on the rubbing noises that can arise when you drive with your Nissan Micra 4, and secondly, the rubbing noises that come from your engine block.rubbing-noise-nissan-micra-4

I hear a rubbing noise on Nissan Micra 4 when I drive

Noise of rubbing from wheels

First, we will center on rubbing noises that can be due to wheel, be aware that in this article we will only examine the most common causes of rubbing noises on Nissan Micra 4 connected with your wheels, if you want a complete guide on wheel noise on Nissan Micra 4, it’s here.

  • Rubbing noise based on your bearing
  • One of the other most likely causes of rubbing noise symptoms on your Nissan Micra 4, may be that one of your bearing is tired, it will commonly produce a loud noise that increase when stressed (turns faster and faster). So remember to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well based here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this article on Ancre_loud_noise, you will most likely find a remedy to your trouble.

  • Brake noise
  • If you notice a rubbing noise on Nissan Micra 4 and you have the feeling that it comes from your wheels, it is highly possible that it is your pads or discs that are the reason. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by removing the wheel. If they are involved, change them as soon as possible , otherwise you will no longer be able to brake. If you experience a metallic noise from your car, and you want infos about it, read this article for more details about brake noises on Nissan Micra 4.

    Noise of rubbing from under the car

    Finally, a rubbing noise on your Nissan Micra 4 from the lower part of the chassis may be linked to a poor attachment of your exhaust to your car. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In such a case, you must check, when cold, that the exhaust holds well, to achieve this try to make it move in different directions and monitor how it responds. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is prospective that a rubber mounts may have died . In this case it will have to be swapped. If your exhaust is the reason of this exhaust noise on Nissan Micra 4, but the silent blocks are not the reason, consult this article to find the reason.

    I hear a rubbing noise on Nissan Micra 4 coming from the engine

    If it approaches an engine noise rubbing on Nissan Micra 4, you may have one of the bearings of your engine accessory parts that is damaged or, one of your belts are displaced or worn and trigger this friction.So verify the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to locate the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also take into account to check the state of your belts, and change them if needed because it is the health of your car that is at stake. If you encounter belt noises on Nissan Micra 4, we recommend that you consult this article for more details on this subject.