Listening noises from your car is never pleasurable. Specifically repeated noises such as rubbing noises on Jeep Compass that will disturb you and prevent you from driving in the usual quiet environment that your car provides you. If you are the subject of rubbing noise on Jeep Compass, you are in the right place, our editorial staff has decided to create this content to support you locate the source and stop it. This is why, first of all, we will look at the rubbing noises that can show up when you drive with your Jeep Compass, and secondly, the rubbing noises that originate from your engine block.
I listen to a rubbing noise on Jeep Compass when I drive
Noise of rubbing from wheels
First, we will focus on rubbing noises that can be linked to wheel, be aware that in this article content we will only explore the most common triggers of rubbing noises on Jeep Compass associated with your wheels, if you want a full report on wheel noise on Jeep Compass, it’s here.
- Rubbing noise coming from your bearing
- Brake noise
One of the other most likely triggers of rubbing noise manifestations on your Jeep Compass, may be that one of your bearing is tired, it will tend to produce a loud noise that raises when stressed (turns faster and faster). So think about to check by taking speed (neutral gear and window open to concentrate only to noise of the wheels) that the noise is well based here, if this is the case change it or them promptly. If, on the other hand, this noise only manifests itself with an engaged speed, read this report on Ancre_loud_noise, you will most likely find a remedy to your issue.
If you encounter a rubbing noise on Jeep Compass and you have the feeling that it comes from your wheels, it is highly plausible that it is your pads or discs that are the reason. Indeed, a disc or a set of dead plates will create a strong metallic friction noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, change them promptly , otherwise you will no longer be able to brake. If you feel a metallic noise from your car, and you want infos about it, go through this guide for more information about brake noises on Jeep Compass.
Noise of rubbing from under the car
Finally, a rubbing noise on your Jeep Compass from the lower part of the chassis may be relating to a poor attachment of your exhaust to your car. Indeed, over time, vibrations, the pot fasteners on the car chassis can come off. In this case, you must check, when cold, that the exhaust holds well, to do this try to make it move in different directions and monitor how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In such a case it will have to be replaced. If your exhaust is the reason of this exhaust noise on Jeep Compass, but the silent blocks are not the reason, consult this guide to find the reason.
I listen to a rubbing noise on Jeep Compass coming from the engine
If it is close to an engine noise rubbing on Jeep Compass, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and provoke this friction.So check the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to show up in rpm, accelerate and position someone at the engine block to establish the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also remember to check the state of your belts, and change them if required because it is the health of your car that is at stake. If you experience belt noises on Jeep Compass, we recommend that you consult this content for more information on this subject.
