Discovering noises from your car is never pleasant. Specifically repeated noises such as rubbing noises on Ford S-max 2 that will disturb you and prevent you from driving in the normal quiet environment that your car provides you. If you are the subject of rubbing noise on Ford S-max 2, you are in the right place, our team has decided to compose this content page to help you find the source and stop it. This is why, first of all, we will look into the rubbing noises that can appear when you drive with your Ford S-max 2, and secondly, the rubbing noises that originate from your engine block.
I listen a rubbing noise on Ford S-max 2 once I drive
Noise of rubbing from wheels
First, we will concentrate on rubbing noises that can be linked to wheel, be aware that in this content we will only check the most traditional triggers of rubbing noises on Ford S-max 2 associated with your wheels, if you need a full report on wheel noise on Ford S-max 2, it’s here.
- Rubbing noise originating from your bearing
- Brake noise
One of the other probable triggers of rubbing noise manifestations on your Ford S-max 2, may be that one of your bearing is tired, it will frequently produce a loud noise that goes up when stressed (turns faster and faster). So remember to check by taking speed (neutral gear and window open to listen only to noise of the wheels) that the noise is well established here, if this is the case swap it or them fairly quickly. If, on the other hand, this noise only manifests itself with an engaged speed, browse this report on Ancre_loud_noise, you will most likely find a solution to your trouble.
If you notice a rubbing noise on Ford S-max 2 and you have the feeling that it comes from your wheels, it is highly conceivable that it is your pads or discs that are the trigger. In fact, a disc or a set of dead plates will generate a strong metallic rubbing noise that you will inevitably feel. To check this, put your car on safety stand, and check the state of your discs and pads by taking out the wheel. If they are involved, swap them quickly , otherwise you will no longer be able to brake. If you encounter a metallic noise from your car, and you want infos about it, read this article for more details about brake noises on Ford S-max 2.
Noise of rubbing from under the car
Finally, a rubbing noise on your Ford S-max 2 from the lower part of the chassis may be connected to a poor attachment of your exhaust to your automobile. In fact, over time, vibrations, the pot fasteners on the car chassis can come off. In this case, you must check, when cold, that the exhaust holds well, to achieve this try to make it move in different directions and observe how it reacts. Backwards there should be some play and be able to move but not too much. The closer you get to the engine, the more fixed it should be. Visually check the fasteners for which you have doubts. Finally, it is conceivable that a rubber mounts may have died . In this case it will have to be swapped. If your exhaust is the trigger of this exhaust noise on Ford S-max 2, but the silent blocks are not the reason, consult this article to find the trigger.
I listen a rubbing noise on Ford S-max 2 coming from the engine
If it approaches an engine noise rubbing on Ford S-max 2, you may have one of the bearings of your engine accessory parts that is affected or, one of your belts are displaced or worn and trigger this friction.So examine the state and try to find the exact location of this noise by positioning someone at the engine at idle, and if this noise is more likely to appear in rpm, accelerate and position someone at the engine block to identify the area of origins of the noise. The three parts whose bearings are often at the origin of these noises are the water pump, the injection pump and the oil pump . Also remember to check the state of your belts, and swap them if needed because it is the health of your car that is at stake. If you encounter belt noises on Ford S-max 2, we would suggest that you read this content page for more information on this subject.
